HOZ

Overheating Unitree G1 was carried down Mount Taishan on a stretcher

In a Unitree G1 overheating scare, a development model stopped part-way up Mount Taishan on 2 November 2026 at the first CMG World Robot Mount Taishan Competition. Its operator withdrew it over safety concerns about overheating, and staff carried the robot down on a stretcher. The course ran 3.9km from Hongmen to Zhongtianmen, up more than 3,100 stone steps.

Key facts

Title card: Unitree G1 overheating on Mount Taishan, carried down on a stretcher
The Mount Taishan robot race, by the numbers
  • 3.9km Course length, Hongmen to Zhongtianmen (source)
  • 3,100+ steps Stone steps on the climb, with about 600m of elevation gain (source)
  • Nearly 90 teams Robot teams entered the first edition on 2 November 2026 (source)
  • 41min 41s Winning A2 quadruped run; 43min 41s with a two-minute penalty (source)

What happened to the Unitree G1 robot on Mount Taishan?

The robot overheated part-way up the climb and did not finish. Event staff put it on a stretcher and carried it down the mountain.

The race was the first CMG World Robot Mount Taishan Competition, held on 2 November 2026 at Mount Taishan in Tai'an, Shandong province. The course ran about 3.9km from Hongmen to Zhongtianmen, over more than 3,100 stone steps and around 600m of climb.

36Kr reports the G1 was run by the Yongda Zhicheng team, and that its operator withdrew it over safety concerns about overheating. Global Times reports that nearly 90 robot teams entered the event.

What caused the Unitree G1 overheating?

Nobody has named the part that failed. Unitree said the robot may have entered the competition with no tuning, and gave no detail on which component ran hot.

Global Times describes the mechanism in general terms: heat built up inside the machine faster than its systems could get rid of it. The G1 on the mountain was a development version, the same model that appeared at the Spring Festival Gala.

36Kr sets out the wider problem. A humanoid has a high centre of gravity and a narrow gait, so it needs continuous high torque to hold itself against gravity. On a long climb that load keeps running, and 36Kr calls poor heat dissipation a common problem across the industry.

What can a Unitree G1 robot do?

The G1 walks on two legs and handles objects with force-controlled hands. Unitree lists 23 degrees of freedom on the base model, a maximum knee torque of 90N.m and an arm load of about 2kg.

It carries a 3D LiDAR, a depth camera, a four-microphone array and an 8-core CPU. Unitree quotes about two hours of battery life from a 9,000mAh pack. The robot stands 1.32m tall and weighs about 35kg.

Robots Guide puts its top speed at 7.2km/h and lists backflips, tai chi routines and fine object handling among its moves. 36Kr says each step needs the joint motors to keep putting out high torque.

Are unitree robots any good?

On the same course, a Unitree four-legged robot won. 36Kr reports that an A2 quadruped entered by the Beijing Lingyi Technology team, under Unitree Technology, finished the racing event in 41 minutes 41 seconds, a final time of 43 minutes 41 seconds after a two-minute penalty, running fully autonomously.

36Kr says it moved steadily and fast over the irregular stone steps. Unitree officially entered the A2 and B2 quadrupeds only.

The result splits by machine type. The company's four-legged robots got up the steps, while the two-legged development unit came back down on a stretcher.

What are people saying about the Unitree G1 'heatstroke'?

Some users joked that the G1 had "heatstroke", Global Times reports. That word is theirs, not a technical description, and the report does not name the platform or the people who posted it.

The same report says others treated the breakdown as a sign that humanoid robots still struggle to work reliably in hard real-world conditions, rather than as a joke.

Questions people ask

How much does a Unitree G1 robot cost?
Unitree's own page lists the base G1 at US$13.5K, with the EDU version sold through a sales contact. In the UK, RobotShop lists it at £19,200 and Scan Computers lists G1 models from £17,599.99 to £45,599.99. Prices checked on 14 November 2026.
Is the Unitree dog robot real?
Yes. Unitree sells four-legged robots, and 36Kr reports it entered the A2 and B2 quadrupeds in the Mount Taishan race. There, an A2 run by the Beijing Lingyi Technology team, under Unitree Technology, won the racing event.
What is the Unitree G1 robot?
It is a two-legged humanoid robot from Unitree Robotics, released on 13 May 2024 according to Robots Guide. Unitree lists the base model at 1.32m, about 35kg and 23 degrees of freedom.
Did Unitree enter the G1 in the race itself?
No. 36Kr reports the G1 development version was run by the Yongda Zhicheng team, and that Unitree officially entered only its A2 and B2 quadrupeds, citing limited time and energy.
How long is the Mount Taishan robot race course?
About 3.9km from Hongmen to Zhongtianmen, with more than 3,100 stone steps and around 600m of elevation gain.

More AI news from Hoz

Read next: Grok Bot phone calls haggled a Comcast bill down to $45; Haidilao denies its dancing robot was out of control; AgiBot humanoid robot left the store and did not come back.

See every AI news story on this site, or meet Hoz, a human in the Age of AI.

Sources

  1. Global Times report on the Unitree G1 overheating at the Mount Taishan robot race
  2. 36Kr report on the race, the G1 withdrawal and the A2 winning time
  3. Interesting Engineering report on the course figures and the overheating
  4. Unitree's own G1 specification and price page
  5. Robots Guide entry on the G1: release date, speed and variants
  6. RobotShop UK listing with the G1 price and battery figures
  7. Scan Computers UK listing with G1 variants and price range